#Post Title #Post Title #Post Title
Senin, 04 Januari 2010

Latest projects


There have been some changes happening here lately - effects pedals are on the back burner as i've been trying to clear the shop of unfinished projects that have accumulated.
I've also built a couple of amps and done some various other boring stuff.
The last amplifier i finished was a tweed voiced head that was kind of a deluxe/pro hybrid with a true point to point preamp. I've never done a point to point amp from scratch before so it was more of an experiment and learning experience than anything else. it came out sounding great and was exceedingly small for the amount of volume it puts out.

The entire head measures 12 inches across by 8 inches deep and 2 inches tall and puts out about 30 watts or so.
The project on the bench at the moment is a pretty standard jcm800 clone. it's coming together nicely and will be a pretty rockin' amp when it gets done.
Photobucket
Photobucket

Photobucket
[ Read More ]
Selasa, 03 November 2009

The killer rabbit of Caerbannog !!!!

The last one was so funny i had to do another:

[ Read More ]
Senin, 19 Oktober 2009

I just finished up these two tremolos for a buddy. It almost looks like i've developed a solid brand or something, eh? :P
[ Read More ]
Minggu, 20 September 2009

Guttermouth Electronics store on zazzle

Go there and buy Lots and LOTS OF STUFF!!!!!!
http://www.zazzle.com/ianbleague
[ Read More ]
Kamis, 10 September 2009


Here's something i just finished up as a surprise for a good guy. i think it's hilarious.The eye lights up in sync with your playing.
[ Read More ]
Kamis, 12 Maret 2009

Boost -O- Rama

Having a mind like a steel trap is a great thing sometimes. In my infinite wisdom i overlooked the fact that my wire supplies were running dangerously low last week.Sooo.......i ran out of wire last weekend.
I had several prototypes that were already built and just needed component tweaking so i got to work on them and put all my paying jobs on hold due to the lack of wire.
Today's pedal was a guitar booster. The circuit is something i've been tweaking on for a while now and it may be done finally. It's a treble booster sort of thing - sounds great with single coils and fender voiced amps.
I wanted a spin art sort of effect and got pretty close by mixing the colors on the enclosure and then pulling them outwards with a piece of wire.
[ Read More ]
Jumat, 06 Maret 2009

Hiding an led.

I may be a bit weird in that, i don't like to see led's when they are turned off. i'm always looking for ways to achieve this goal and today's experiment turned out well.
here's a close up of the top of the pedal with the light off :


If you look really hard under the letter above you'll see a small bump.


The trick is :
drill into the back of the enclosure slowly while looking at the front.if you drill slowly enough you will see the bit come through the aluminum.stop before the drill bit pierces the powdercoat.
now, take your led, sand the end flat and glue it into the hole in the aluminum. wire up the led as you would normally.
you may have to experiment with dropping resistor values for the led to be bright enough to be seen through the powdercoat but, if you're using super bright led's,chances are, you'll be good to go.
[ Read More ]